15.2 Energy in Simple Harmonic Motion

Energy and the Simple Harmonic Oscillator

To study the energy of a simple harmonic oscillator, we need to consider all the forms of energy. Consider the example of a block attached to a spring, placed on a frictionless surface, oscillating in SHM. The potential energy stored in the deformation of the spring is

In a simple harmonic oscillator, the energy oscillates between kinetic energy of the mass [latex]K=\frac{1}{2}m{v}^{2}[/latex] and potential energy [latex]U=\frac{1}{2}k{x}^{2}[/latex] stored in the spring. In the SHM of the mass and spring system, there are no dissipative forces, so the total energy is the sum of the potential energy and kinetic energy. In this section, we consider the conservation of energy of the system. The concepts examined are valid for all simple harmonic oscillators, including those where the gravitational force plays a role.

Consider Figure, which shows an oscillating block attached to a spring. In the case of undamped SHM, the energy oscillates back and forth between kinetic and potential, going completely from one form of energy to the other as the system oscillates. So for the simple example of an object on a frictionless surface attached to a spring, the motion starts with all of the energy stored in the spring as elastic potential energy. As the object starts to move, the elastic potential energy is converted into kinetic energy, becoming entirely kinetic energy at the equilibrium position. The energy is then converted back into elastic potential energy by the spring as it is stretched or compressed. The velocity becomes zero when the kinetic energy is completely converted, and this cycle then repeats. Understanding the conservation of energy in these cycles will provide extra insight here and in later applications of SHM, such as alternating circuits.

Consider Figure, which shows the energy at specific points on the periodic motion. While staying constant, the energy oscillates between the kinetic energy of the block and the potential energy stored in the spring:

The motion of the block on a spring in SHM is defined by the position [latex]x(t)=A\text{cos}(\omega t+\varphi )[/latex] with a velocity of [latex]v(t)=\text{−}A\omega \text{sin}(\omega t+\varphi )[/latex]. Using these equations, the trigonometric identity [latex]{\text{cos}}^{2}\theta +{\text{sin}}^{2}\theta =1[/latex] and [latex]\omega =\sqrt{\frac{k}{m}}[/latex], we can find the total energy of the system:

The total energy of the system of a block and a spring is equal to the sum of the potential energy stored in the spring plus the kinetic energy of the block and is proportional to the square of the amplitude [latex]{E}_{\text{Total}}=(1\text{/}2)k{A}^{2}.[/latex] The total energy of the system is constant.

A closer look at the energy of the system shows that the kinetic energy oscillates like a sine-squared function, while the potential energy oscillates like a cosine-squared function. However, the total energy for the system is constant and is proportional to the amplitude squared. Figure shows a plot of the potential, kinetic, and total energies of the block and spring system as a function of time. Also plotted are the position and velocity as a function of time. Before time [latex]t=0.0\,\text{s,}[/latex] the block is attached to the spring and placed at the equilibrium position. Work is done on the block by applying an external force, pulling it out to a position of [latex]x=+A[/latex]. The system now has potential energy stored in the spring. At time [latex]t=0.00\,\text{s,}[/latex] the position of the block is equal to the amplitude, the potential energy stored in the spring is equal to [latex]U=\frac{1}{2}k{A}^{2}[/latex], and the force on the block is maximum and points in the negative x-direction [latex]({F}_{S}=\text{−}kA)[/latex]. The velocity and kinetic energy of the block are zero at time [latex]t=0.00\,\text{s}\text{.}[/latex] At time [latex]t=0.00\,\text{s,}[/latex] the block is released from rest.

Oscillations About an Equilibrium Position

We have just considered the energy of SHM as a function of time. Another interesting view of the simple harmonic oscillator is to consider the energy as a function of position. Figure shows a graph of the energy versus position of a system undergoing SHM.

The potential energy curve in Figure resembles a bowl. When a marble is placed in a bowl, it settles to the equilibrium position at the lowest point of the bowl [latex](x=0)[/latex]. This happens because a restoring force points toward the equilibrium point. This equilibrium point is sometimes referred to as a fixed point. When the marble is disturbed to a different position [latex](x=+A)[/latex], the marble oscillates around the equilibrium position. Looking back at the graph of potential energy, the force can be found by looking at the slope of the potential energy graph [latex](F=-\frac{dU}{dx})[/latex]. Since the force on either side of the fixed point points back toward the equilibrium point, the equilibrium point is called a stable equilibrium point. The points [latex]x=A[/latex] and [latex]x=\text{−}A[/latex] are called the turning points. (See Potential Energy and Conservation of Energy.)

Stability is an important concept. If an equilibrium point is stable, a slight disturbance of an object that is initially at the stable equilibrium point will cause the object to oscillate around that point. The stable equilibrium point occurs because the force on either side is directed toward it. For an unstable equilibrium point, if the object is disturbed slightly, it does not return to the equilibrium point.

Consider the marble in the bowl example. If the bowl is right-side up, the marble, if disturbed slightly, will oscillate around the stable equilibrium point. If the bowl is turned upside down, the marble can be balanced on the top, at the equilibrium point where the net force is zero. However, if the marble is disturbed slightly, it will not return to the equilibrium point, but will instead roll off the bowl. The reason is that the force on either side of the equilibrium point is directed away from that point. This point is an unstable equilibrium point.

Figure shows three conditions. The first is a stable equilibrium point (a), the second is an unstable equilibrium point (b), and the last is also an unstable equilibrium point (c), because the force on only one side points toward the equilibrium point.

The process of determining whether an equilibrium point is stable or unstable can be formalized. Consider the potential energy curves shown in Figure. The force can be found by analyzing the slope of the graph. The force is [latex]F=-\frac{dU}{dx}.[/latex] In (a), the fixed point is at [latex]x=0.00\,\text{m}\text{.}[/latex] When [latex]x \lt 0.00\,\text{m,}[/latex] the force is positive. When [latex]x \gt 0.00\,\text{m,}[/latex] the force is negative. This is a stable point. In (b), the fixed point is at [latex]x=0.00\,\text{m}\text{.}[/latex] When [latex]x \lt 0.00\,\text{m,}[/latex] the force is negative. When [latex]x \gt 0.00\,\text{m,}[/latex] the force is also negative. This is an unstable point.

A practical application of the concept of stable equilibrium points is the force between two neutral atoms in a molecule. If two molecules are in close proximity, separated by a few atomic diameters, they can experience an attractive force. If the molecules move close enough so that the electron shells of the other electrons overlap, the force between the molecules becomes repulsive. The attractive force between the two atoms may cause the atoms to form a molecule. The force between the two molecules is not a linear force and cannot be modeled simply as two masses separated by a spring, but the atoms of the molecule can oscillate around an equilibrium point when displaced a small amount from the equilibrium position. The atoms oscillate due the attractive force and repulsive force between the two atoms.

Consider one example of the interaction between two atoms known as the van Der Waals interaction. It is beyond the scope of this chapter to discuss in depth the interactions of the two atoms, but the oscillations of the atoms can be examined by considering one example of a model of the potential energy of the system. One suggestion to model the potential energy of this molecule is with the Lennard-Jones 6-12 potential:

A graph of this function is shown in Figure. The two parameters [latex]\epsilon[/latex] and [latex]\sigma[/latex] are found experimentally.

From the graph, you can see that there is a potential energy well, which has some similarities to the potential energy well of the potential energy function of the simple harmonic oscillator discussed in Figure. The Lennard-Jones potential has a stable equilibrium point where the potential energy is minimum and the force on either side of the equilibrium point points toward equilibrium point. Note that unlike the simple harmonic oscillator, the potential well of the Lennard-Jones potential is not symmetric. This is due to the fact that the force between the atoms is not a Hooke’s law force and is not linear. The atoms can still oscillate around the equilibrium position [latex]{x}_{\text{min}}[/latex] because when [latex]x \lt {x}_{\text{min}}[/latex], the force is positive; when [latex]x \gt {x}_{\text{min}}[/latex], the force is negative. Notice that as x approaches zero, the slope is quite steep and negative, which means that the force is large and positive. This suggests that it takes a large force to try to push the atoms close together. As x becomes increasingly large, the slope becomes less steep and the force is smaller and negative. This suggests that if given a large enough energy, the atoms can be separated.

If you are interested in this interaction, find the force between the molecules by taking the derivative of the potential energy function. You will see immediately that the force does not resemble a Hooke’s law force [latex](F=\text{−}kx)[/latex], but if you are familiar with the binomial theorem:

the force can be approximated by a Hooke’s law force.

Velocity and Energy Conservation

Getting back to the system of a block and a spring in Figure, once the block is released from rest, it begins to move in the negative direction toward the equilibrium position. The potential energy decreases and the magnitude of the velocity and the kinetic energy increase. At time [latex]t=T\text{/}4[/latex], the block reaches the equilibrium position [latex]x=0.00\,\text{m,}[/latex] where the force on the block and the potential energy are zero. At the equilibrium position, the block reaches a negative velocity with a magnitude equal to the maximum velocity [latex]v=\text{−}A\omega[/latex]. The kinetic energy is maximum and equal to [latex]K=\frac{1}{2}m{v}^{2}=\frac{1}{2}m{A}^{2}{\omega }^{2}=\frac{1}{2}k{A}^{2}.[/latex] At this point, the force on the block is zero, but momentum carries the block, and it continues in the negative direction toward [latex]x=\text{−}A[/latex]. As the block continues to move, the force on it acts in the positive direction and the magnitude of the velocity and kinetic energy decrease. The potential energy increases as the spring compresses. At time [latex]t=T\text{/}2[/latex], the block reaches [latex]x=\text{−}A[/latex]. Here the velocity and kinetic energy are equal to zero. The force on the block is [latex]F=+kA[/latex] and the potential energy stored in the spring is [latex]U=\frac{1}{2}k{A}^{2}[/latex]. During the oscillations, the total energy is constant and equal to the sum of the potential energy and the kinetic energy of the system,

The equation for the energy associated with SHM can be solved to find the magnitude of the velocity at any position:

The energy in a simple harmonic oscillator is proportional to the square of the amplitude. When considering many forms of oscillations, you will find the energy proportional to the amplitude squared.